Shop-Aid Arbor Shims come without keyways and Spacers come with keyways. A set is an assortment of 1 piece of each thickness (available in ID of 2-1/2” or smaller). Sizes with ID of 2-1/2” or smaller are sold in 10 piece packages, larger sizes are packaged to order. All Arbor Spacers and Shims with a 3-1/4” OD and larger and over .032” thickness are made from gauge stock and hold a thickness tolerance of +/- 10%. Tolerances up to 3-1/4” OD: Thicknesses Tolerances .001” - .006” +/-.0005” .007”-.015” +/- .00075” .020”-.025” +/-.001” .032” +/-.002” .047”-.093” +/- .0025” .125” +/- .003” ID +.005”/-.000 OD +.000”/.005”
 

Shop-Aid Arbor Shims come without keyways and Spacers come with keyways. A set is an assortment of 1 piece of each thickness (available in ID of 2-1/2” or smaller). Sizes with ID of 2-1/2” or smaller are sold in 10 piece packages, larger sizes are packaged to order. All Arbor Spacers and Shims with a 3-1/4” OD and larger and over .032” thickness are made from gauge stock and hold a thickness tolerance of +/- 10%. Tolerances up to 3-1/4” OD: Thicknesses Tolerances .001” - .006” +/-.0005” .007”-.015” +/- .00075” .020”-.025” +/-.001” .032” +/-.002” .047”-.093” +/- .0025” .125” +/- .003” ID +.005”/-.000 OD +.000”/.005”
 

Shop-Aid Oil Hardened O-1 tool steel is a general purpose oil-hardening tool and die steel. It has good abrasion resistance, and sufficient toughness for normal tool and die applications. When compared to a 1 percent carbon steel, O-1 has a machinability rating of 90. Diameters range from 1/16” – 3”. Water Hardened W-1 Shop-Aid Water Hardened W-1 tool steel is a general purpose water-hardening tool steel with a 1.00% Carbon content. W-1 is the easiest of all steel to machine with a machinability rating of 100 as a basis for comparison with other tool steels. Diameters range from 1/16” – 2”. Threaded Rod Shop-Aid zinc plated Threaded Rod available in 3’, 6’ and 12’ lengths on most sizes. SAE or (fine thread) is also available upon request. Both are available unplated.. All sold in tube quantity only. Sizes range from 4-40 and 2-4 ½”. Shafting Shop-Aid steel Shafts are made from bar-quality cold drawn 1018 steel. For axles, equipment drive shafts, furnace blower shafts, or for industrial maintenance departments for repair or replacement shafting. Size to undersize +0, -.002. Sizes range from .25” to 1” diameter in 36” lengths.
 

Feeler Gage – 1095 Steel Shop-Aid Feeler Gage is a high carbon Swedish Feeler Gage alloy 1095. The material is rolled to the highest tolerance to assure accuracy. Available in ½” x 12” length or ½” x 25’ coils from stock. Thickness range: .001” - .125”. Metric Feeler Gage is also available.
 

Key Stock– 1018 Steel Shop-Aid Key Stock is held to a tight tolerance (+.002”, -.000”) to ensure a tight fit. The steel stock is zinc coated, then stamped with size for easy identification. Square Key Stock sizes range from 1/8” to 2” and 4mm to 25mm. Available in 12”, 3’, 6’ and 12’.
 

Metal balls available in brass or stainless steel.
 

Shop-Aid’s O-Ring kit contains 382 pieces of the 30 most popular sizes. The kit is ideal for personal and professional workshops, auto service centers, garages and plumbing services. The O-Rings are made of Buna-N BG 715 (Nitrile 70 Durometer) and conform to ASTM D2000 and SAE J200 standards. Sizes range from 1/8”ID, ¼”OD, 1/16” section to 1 ¾”ID, 2 1/8”OD, 3/16” section.
 

We are a manufacturer of PDR (Paintless Dent Removal) and are here to serve technicians directly at substantial savings by using the internet as our exclusive vehicle for distribution. Please take a look at our products and let us know what else you would like to see. Because we manufacture all our tools at our plant in Connecticut we welcome the opportunity to modify our tools for your specific needs.
 

Basically the file steel is the same and all specifications meet or exceed U.S. Government standards. Warrensville File has no "seconds" or subquality levels - each quality offered is the best with respect to the country of origin. "U.S.A Made" is still in high demand, however not all people can or need to pay prime for the particular file applications. Subsequently, Warrensville offeres three Qualities of American Pattern files from which to choose:
 

Shop-Aid Shur-Shims eliminate hand cutting of shims which can cause sharp corners or burrs. Slotted shims provide a more stable alignment by eliminating stacking of shims.
 

Shop-Aid’s Spacing Collars are hardened and precisely ground for spacing milling cutters, saws, and grinding tools. They are furnished with standard keyway and chamfered edges. Rockwell Hardness is C35-48. Ends are parallel and flat within .0005”, and are square with ID within .002 TIR. Spacing Collar tolerances: ID +.003”/-.001”, OD +.000”/-.010”, Overall Length: +/-.0005”.
 

Typical applications for the smallest and lightest of the MauiMount 100 series include optical alignment fixtures, laser, proximity or optical sensor aiming, air or liquid delivery systems, camera and display mounting. Depending on the application, this mount will easily hold more than 20 pounds in any position. The patented ball and ring clamp not only holds more weight, but will do it regardless of the most severe shock and/or vibration, and in the most hostile environments.
 

Ticronic Tool Steel Foil is a type 321 annealed stainless steel used in the heat treating of tool steel parts. The wrap eliminates the need for Ni-Chrome or box packing or the use of sawdust or other carbonaceous materials. No special controlled atmosphere furnaces are required. Guaranteed to be taken up to 2000 degrees Fahrenheit. Simple to use; place tool in Ticronic Tool Steel Wrap; fold over and crimp edges forming an airtight package; place package in oven and, heat treat in usual way. Further technical information is available upon request. For special applications, Ticronic 2000 or 321/.003" thickness stainless steel foil is available for higher temperature applications. * Cuts air hardening costs, eliminates Ni-Chrome box with charcoal and sawdust. * No special Atmosphere controls needed. * Saves time, allows in-house heat treating. * Wrap tool in foil and heat treat in usual manner. Ticronic 2000 now available for higher temperature applications such as high speed steels. Ticronic 2000 can be used for temperatures approaching 2250 degrees fahrenheit! Available in 50' and 100' rolls just like our regular Ticronic. Ticronic 2000 is the answer for high temperature heat treating. Works for most applications and eliminates the need for double wrapping or using .003" thick foil. Please note that high temperature applications require tool to be at highest temperatures for a very short period of time. For best high temperature results follow instructions very specifically.
 

Used Machinery